February 2013 - PSDR - mailman.hamwan.org

Where does one buy these V-Bolt clamps cheaply?
by Bart Kus 28 Feb '13

28 Feb '13

I'm thinking about $2.50/ea would be nice. Muffler clamps are NOT adequate. Muffler clamps have 2 semi-circle contact surfaces, and if the pipe is slightly smaller than the clamp, this creates a 2-point contact which causes rocking action. Gross. The nice toothed and V-angled designs here are the bomb. Soup for scale. :) --Bart

4 9

Component Engineering: Ethernet Switch - 8 port
by Bart Kus 28 Feb '13

28 Feb '13

Dear Ben-Jammin', So you might recall our recent discussion where you weighed in favor of putting "real" switches into the cell sites to tie the radios together. My major pushback to you was the price of a typical Cisco/etc switch. Well, I've updated the "Ethernet Switch - 8 port <https://www.hamwan.org/t/tiki-index.php?page=Ethernet+Switch+-+8+port&struc…>" page with 3 new alternatives! They're a miniscule amount of money more than the D-Link smart switch, and are in fact full blown RouterOS routers. They also feature 2 more ports (10 total) than the 8-port requirement, but the catch is only 5 of the ports are GigE. This might be OK since all the 5SHPn radios are 100Mbit only. The GigE requirement was for future-proofing only. The other super nice thing is they can do MPLS-TE and preserve QoS. This might simplify the network structure a lot by moving routing off of the modems and into these routers. Instead of 7 linked routers at a busy cell site, we'd have 1. The routing tables get a lot easier. These routers also have more routing horsepower than what's in the modems. Especially the $105 model, which features a faster CPU and twice the RAM. 2 of the 3 are also rack-mountable, which might be a good thing in most sites. Finally, the idea of using a single OS for all networking is appealing. No need for fragmented administrator education, and all the gear is designed to work together. Let me know what you think. I'm kinda psyched about this approach. I ordered a RB2011UAS-2HnD-IN for my personal home use to replace my AP+router here. We'll see how it works out here. --Bart RB2011UAS2HnDIN

3 4

Re: [HamWAN PSDR] Where does one buy these V-Bolt clamps cheaply?
by KL7WM＠aol.com 27 Feb '13

27 Feb '13

Tacoma Screw is my favorite go to place for hard to find nuts and bolts. Daniel Stevens, KL7WM In a message dated 2/27/2013 7:25:25 P.M. Pacific Standard Time, me(a)bartk.us writes: I'm thinking about $2.50/ea would be nice. Muffler clamps are NOT adequate. Muffler clamps have 2 semi-circle contact surfaces, and if the pipe is slightly smaller than the clamp, this creates a 2-point contact which causes rocking action. Gross. The nice toothed and V-angled designs here are the bomb. Soup for scale. :) --Bart _______________________________________________ PSDR mailing list PSDR(a)hamwan.org http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org

1 0

Re: [HamWAN PSDR] Where does one buy these V-Bolt clamps cheaply?
by KL7WM＠aol.com 27 Feb '13

27 Feb '13

Any auto parts store should have a selection. I also would try McLendon's Hardward. When you tighen they enough they will bite. Daniel Stevens, KL7WM In a message dated 2/27/2013 7:25:25 P.M. Pacific Standard Time, me(a)bartk.us writes: I'm thinking about $2.50/ea would be nice. Muffler clamps are NOT adequate. Muffler clamps have 2 semi-circle contact surfaces, and if the pipe is slightly smaller than the clamp, this creates a 2-point contact which causes rocking action. Gross. The nice toothed and V-angled designs here are the bomb. Soup for scale. :) --Bart _______________________________________________ PSDR mailing list PSDR(a)hamwan.org http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org

1 0

WANTED: Structural engineer for tower analysis work
by Bart Kus 26 Feb '13

26 Feb '13

Hello, HamWAN needs a structural engineer to do analysis of towers and loads and sign off on safety. If you know of such a person who would be willing to do this work, please share. Thanks, --Bart

2 4

Weekly meeting in 30 minutes @ 7PM PST
by Bart Kus 26 Feb '13

26 Feb '13

Just a reminder we'll be meeting in 30 minutes. Below is the agendar. I have new items around DNR, Cogent, HE.net, and a possible collaboration with IntermountainInternetIncorporated. Also, sector shielding material was just picked up, we'll see if it improves isolation at all. --Bart On 2/25/2013 2:13 PM, me(a)bartk.us wrote: > 0) Rob will update us on rotor control software progress. > > ----- Reply message ----- > From: "Bart Kus" <me(a)bartk.us> > To: "Puget Sound Data Ring" <psdr(a)hamwan.org> > Subject: [HamWAN PSDR] Agenda for tomorrow's meeting (Feb 26, 2013) > Date: Mon, Feb 25, 2013 2:05 pm > > > Hello, > > 1) We'll know results of vote on sector antenna purchase. These > antennas will get home-fab shields attached. > 2) Ben will update about insurance policy details + any bylaws work. > 3) Curt will update about future promotional bookings. > 4) Discuss Flea Market game plan. We need to stand up the cell site a > week before the market to have time to configure any services / > demos. I'll make remote access available. I would also like to hear > a roll call of who will / will not be there, and who will help with > setup on Friday. We need to decide on the scope of the display, which > will be driven by help available for setup/guarding/teardown. > 5) Cory will likely not attend, but if he does, will give an update on > 802.1x research progress. > 6) Open discussion of any other issues. > > If you'd like to append to this agenda, please respond to this email > with your needs. New attendees welcome! You may walk away with work > though. ;) > > *Meeting Details* > > *How* > > > > Mumble <http://mumble.sourceforge.net/> voice + text chat software > > *Where* > > > > Connect to server "BartK.us" > > *When* > > > > Tuesdays @ 7:00PM PST for 1 hour > > > > --Bart > > > > _______________________________________________ > PSDR mailing list > PSDR(a)hamwan.org > http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org

1 0

VOTE: Purchasing cell site equipment
by Bart Kus 26 Feb '13

26 Feb '13

Hello, As per our new constitution, I'm making a public announcement of intent to spend funds. This is to purchase cell site equipment. The purchase is for 3 sector antennas of the Laird 16dBi variety and will total about $528.06. Shipping will be additional. I'm voting yes on this. Any directors who wish to vote have 24 hours before voting is concluded. Any members who wish to comment to influence director votes may do so now. --Bart

1 1

Re: [HamWAN PSDR] Agenda for tomorrow's meeting (Feb 26, 2013)
by me＠bartk.us 25 Feb '13

25 Feb '13

0) Rob will update us on rotor control software progress. ----- Reply message ----- From: "Bart Kus" <me(a)bartk.us> To: "Puget Sound Data Ring" <psdr(a)hamwan.org> Subject: [HamWAN PSDR] Agenda for tomorrow's meeting (Feb 26, 2013) Date: Mon, Feb 25, 2013 2:05 pm Hello, 1) We'll know results of vote on sector antenna purchase. These antennas will get home-fab shields attached. 2) Ben will update about insurance policy details + any bylaws work. 3) Curt will update about future promotional bookings. 4) Discuss Flea Market game plan. We need to stand up the cell site a week before the market to have time to configure any services / demos. I'll make remote access available. I would also like to hear a roll call of who will / will not be there, and who will help with setup on Friday. We need to decide on the scope of the display, which will be driven by help available for setup/guarding/teardown. 5) Cory will likely not attend, but if he does, will give an update on 802.1x research progress. 6) Open discussion of any other issues. If you'd like to append to this agenda, please respond to this email with your needs. New attendees welcome! You may walk away with work though. ;) Meeting Details How Mumble voice + text chat software Where Connect to server "BartK.us" When Tuesdays @ 7:00PM PST for 1 hour --Bart

1 0

Agenda for tomorrow's meeting (Feb 26, 2013)
by Bart Kus 25 Feb '13

25 Feb '13

Hello, 1) We'll know results of vote on sector antenna purchase. These antennas will get home-fab shields attached. 2) Ben will update about insurance policy details + any bylaws work. 3) Curt will update about future promotional bookings. 4) Discuss Flea Market game plan. We need to stand up the cell site a week before the market to have time to configure any services / demos. I'll make remote access available. I would also like to hear a roll call of who will / will not be there, and who will help with setup on Friday. We need to decide on the scope of the display, which will be driven by help available for setup/guarding/teardown. 5) Cory will likely not attend, but if he does, will give an update on 802.1x research progress. 6) Open discussion of any other issues. If you'd like to append to this agenda, please respond to this email with your needs. New attendees welcome! You may walk away with work though. ;) *Meeting Details* *How* Mumble <http://mumble.sourceforge.net/> voice + text chat software *Where* Connect to server "BartK.us" *When* Tuesdays @ 7:00PM PST for 1 hour --Bart

1 0

Holy smokes, we have Internet address space!
by Bart Kus 23 Feb '13

23 Feb '13

Result: APPROVED Your allocated subnet is: 44.24.240.0 / 20 https://portal.ampr.org/networks.php?a=region&id=191 HamWAN now has 4096 real Internet IPs to play with. Next up: we gotta crack the mystery of getting IPv6 net space. Any volunteers? :) What an incredibly productive day, --Bart

5 15