November 2023 - PSDR - mailman.hamwan.org

ETiger upgrades
by Doug Kingston 29 Nov '23

29 Nov '23

I will shortly be upgrading some HamWAN devices at ETiger to install more recent RouterOS software. The outages should be brief. -Doug-

1 0

Subnet 44.24.240.64/28 retired, new subnet is 44.25.66.64/28
by Doug Kingston 26 Nov '23

26 Nov '23

This was the wireless subnet for S1.Haystack. Three existing static leases have been moved to an address in the new subnet and their host entries updated in DNS. The 2 static routes were also updated. Please report any anomalies to netops(a)hamwan.net. Regards, -Doug-

1 0

Network outages, maintenance, and changes
by Rob Salsgiver 23 Nov '23

23 Nov '23

FYI there is quite a bit of work that has been done today and will be continuing over the coming days or week or more. 1. IP changes were made to remove old address space from SnoDEM that have affected routing in some parts of the network 2. Repairs are needed and planned to be made to ETiger 3. There is an outage believed to be in the power subsystem at Baldi that has most of that site down. Repairs are hoped to happen before weather changes (others may have better timeline details. 4. I'll be going up to Lookout for minor troubleshooting of on-site DMR equipment (sorry, no climber for work on S2 - more likely in the spring) Be aware that there may be other ripple impacts throughout the network on some or all of this work. Please let the NetOps group know if there are problems with particular sites or gear. If possible, do NOT post to the larger PSDR group unless needed. Cheers, Rob Salsgiver - NR3O

1 0

Point to Point Link
by Duane Braford 10 Nov '23

10 Nov '23

Hello, We are looking at replacing an old repeater link, what we are losing access to. We are looking at leveraging HamWAN to provide a path for further growth, and possibility connection to HamWAN in the further. There is a possibility of a third node being able to connect to the system. I am assuming I will have to set up static routing. Currently I have a pair of RB912UAG-5HPnD-OUT that I am trying to get to talk with each other. I have looked at you examples of Client configuration and the Point-to-Point configuration. I believe I am missing something, I still can't get them to calk to each other. Regards,DuaneWB7ROZ

2 1