- PSDR - mailman.hamwan.org

Anyone have (access to) a high quality pipe bender?
by Bart Kus 27 Jun '13

27 Jun '13

Hi, These pipe bends for the Baldi mounts are not turning out great. Need something to bend 2-3/8" (OD) tubing with 90 deg angles and leave it looking pretty. The harbor freight bender for this is not the right design. A design like these seems a lot more appropriate: http://www.probender.com/ where it pulls the tube through and around the bend. Horizontally oriented gear like that would also work. Any suggestions? --Bart

2 2

5SHPn modems in stock @ r0c-noc
by Bart Kus 27 Jun '13

27 Jun '13

http://www.roc-noc.com/mikrotik/routerboard/RBMetal5SHPn.html 54 left, if you'd like to start playing with the cell sites. Paine is on the air, and we're gonna need some alpha testers. --Bart

1 0

Need mechanical assistance with van repair
by Bart Kus 24 Jun '13

24 Jun '13

Hello, In order to deploy to the Baldi site, a very rough road needs to be traversed. My car is not suitable for this type of road. I bought a van which can drive this road, but it needs engine repair. If you're handy with your hands, or even tool-fetching, your help would be greatly appreciated. I have the garage equipped to perform this repair, but it will go 3x faster with a helper or 2. We're shooting for Baldi this weekend, so a repair this week would be optimal. Please email me if you're willing to help with repairs this week or at some later date. I'll send you the address. Repairs will happen after work, 6PM until whenever. There are lights on site, so only stamina is a limiting factor. Thanks for any help, --Bart

1 0

Re: [HamWAN PSDR] Paine Field pre-deploy roll call
by Bart Kus 24 Jun '13

24 Jun '13

I'm (predictably) behind. Still packing. Likely won't arrive until 10:00AM. --Bart On 6/21/2013 10:28 AM, me(a)bartk.us wrote: > Whoops I meant 24hrs out. Saturday at 9:30am is the start. > > ----- Reply message ----- > From: "Bart Kus" <me(a)bartk.us> > To: <psdr(a)hamwan.org> > Subject: [HamWAN PSDR] Paine Field pre-deploy roll call > Date: Fri, Jun 21, 2013 9:33 am > > > Hello, > > We are 48 hours from the Paine Field deploy. If you've been asked to > assist with the deploy, can you confirm your availability here? > > Also, I passed the training course, so HamWAN will now have access to a > certified tower climber! Me! :) > > --Bart > > > _______________________________________________ > PSDR mailing list > PSDR(a)hamwan.org > http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org > > > _______________________________________________ > PSDR mailing list > PSDR(a)hamwan.org > http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org

2 2

Re: [HamWAN PSDR] Paine Field pre-deploy roll call
by KL7WM＠aol.com 22 Jun '13

22 Jun '13

ARRL Field Day has a new rule this year. Set up is for 24 hours, but it does not have to be contiguous. It can be 8 hour here and 16 hours there as long as it starts after 00.00 hours UTC Thrusday. Daniel Stevens, KL7WM In a message dated 6/21/2013 10:28:59 A.M. Pacific Daylight Time, me(a)bartk.us writes: Whoops I meant 24hrs out. Saturday at 9:30am is the start. ----- Reply message ----- From: "Bart Kus" <me(a)bartk.us> To: <psdr(a)hamwan.org> Subject: [HamWAN PSDR] Paine Field pre-deploy roll call Date: Fri, Jun 21, 2013 9:33 am Hello, We are 48 hours from the Paine Field deploy. If you've been asked to assist with the deploy, can you confirm your availability here? Also, I passed the training course, so HamWAN will now have access to a certified tower climber! Me! :) --Bart _______________________________________________ PSDR mailing list PSDR(a)hamwan.org http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org _______________________________________________ PSDR mailing list PSDR(a)hamwan.org http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org

3 2

Re: [HamWAN PSDR] Paine Field pre-deploy roll call
by me＠bartk.us 21 Jun '13

21 Jun '13

Whoops I meant 24hrs out. Saturday at 9:30am is the start. ----- Reply message ----- From: "Bart Kus" <me(a)bartk.us> To: <psdr(a)hamwan.org> Subject: [HamWAN PSDR] Paine Field pre-deploy roll call Date: Fri, Jun 21, 2013 9:33 am Hello, We are 48 hours from the Paine Field deploy. If you've been asked to assist with the deploy, can you confirm your availability here? Also, I passed the training course, so HamWAN will now have access to a certified tower climber! Me! :) --Bart _______________________________________________ PSDR mailing list PSDR(a)hamwan.org http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org

1 0

Re: [HamWAN PSDR] Paine Field pre-deploy roll call
by KL7WM＠aol.com 21 Jun '13

21 Jun '13

That is great. If I want a Certified Tower Climber I will certify MYSELF. I have climbed and taught and hired and managed climber for 40 years. Daniel Stevens, KL7WM Self Certified Tower Climber In a message dated 6/21/2013 9:33:34 A.M. Pacific Daylight Time, me(a)bartk.us writes: Hello, We are 48 hours from the Paine Field deploy. If you've been asked to assist with the deploy, can you confirm your availability here? Also, I passed the training course, so HamWAN will now have access to a certified tower climber! Me! :) --Bart _______________________________________________ PSDR mailing list PSDR(a)hamwan.org http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org

1 0

Paine Field pre-deploy roll call
by Bart Kus 21 Jun '13

21 Jun '13

Hello, We are 48 hours from the Paine Field deploy. If you've been asked to assist with the deploy, can you confirm your availability here? Also, I passed the training course, so HamWAN will now have access to a certified tower climber! Me! :) --Bart

3 2

Newbie, second Posting, My location
by Patrick Barthelow 13 Jun '13

13 Jun '13

Hi Guys, FWIW: I am at a very good home location with 2000 feet elevation and a view of the the Nor Cal region, all the way to Mount Diablo, east bay area. Also need recommendations for a buy of a APRS compatible weather station, and Pan and Tilt Cameras for a site monitor node of a remote site... -- Best, Pat Barthelow apolloeme(a)gmail.com Google Lunar X prize Team, SYNERGY MOON wwww.synergymoon.com pat.barthelow(a)synergymoon.com

1 0

Greetings, First post from a newbie..
by Patrick Barthelow 13 Jun '13

13 Jun '13

Hello Guys, this is my first post... I am on the Synergy Moon X prize team, and have a number of other space/microwave projects... Here is an interesting cheap Audio/digital/RF Mesh network device: http://villagetelco.org/mesh-potato/ -- Best, Pat Barthelow apolloeme(a)gmail.com Google Lunar X prize Team, SYNERGY MOON wwww.synergymoon.com pat.barthelow(a)synergymoon.com

1 0