Howdy, I'm new to the area and excited to get involved in PSDR. I got myself a MikroTik SXT 5nD r2 and I have good line of sight to the CapitolPark cell. After working my way through the Client Node Configuration instructions, I can see the AP with an SNR of 38 dB, but I'm unable to connect. [admin@AG6IE-CapitolPark] > /interface wireless scan 0 ADDRESS SSID CHANNEL SIG NF SNR RADIO-NAME ROUTEROS-VERSION A RT B D4:CA:6D:30:75:89 HamWAN 5920/5/an -87 -125 38 CapitolPark-S1/K7WAN [admin@AG6IE-CapitolPark] > /log print ... 00:50:58 wireless,info D4:CA:6D:30:75:89@wlan1: failed to connect, on 5920000, registration timeout [admin@AG6IE-CapitolPark] > /interface wireless print Flags: X - disabled, R - running 0 name="wlan1" mtu=1500 l2mtu=1600 mac-address=4C:5E:0C:5B:A6:FB arp=enabled interface-type=Atheros AR9300 mode=station-bridge ssid="HamWAN" frequency=5920 band=5ghz-onlyn channel-width=5mhz scan-list=HamWAN wireless-protocol=nv2 vlan-mode=no-tag vlan-id=1 wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no security-profile=default compression=no Did I miss some setup step? Do I need to get my MAC address whitelisted or something? I wiped the settings and started over, and now I'm getting a different failure: [admin@AG6IE-CapitolPark] /interface wireless> scan 0 failure: other tool running I rebooted, and then tried to use the WebFig interface to scan and connect. Again I saw the network, but the connection never succeeded. Got this in the log: 00:22:35 wireless,info D4:CA:6D:30:75:89@wlan1: failed to connect, on 5920000, registration timeout -Eric AG6IE