For my images, did you click on the image in the browser to zoom in to 100%? I framed the shot to capture most of the 1"x3" circuit board. It's capable of a 1:1 macro image (which is much closer than I did in the images below), which means that the image will be the same size as the sensor (in this case a "full-frame" 24x36mm). Now, that 24x36mm sensor is 7360x4912 pixels. The images below were taken in JPG format. For really good sharpness, I'd take them in RAW (Nikon's "NEF") format, or TIFF format. The manual says that the TIFF files in maximum resolution are 108.2 MB. -- Dean On 2015-10-29 21:18, Bart Kus wrote:
Sounds like it's time for a shoot-off between the macro and the micro! The features/labels on the 9HPn are right at the edge of resolution of both of these by the looks of it. I can do photo stitching from lots of pix, that's not a problem.
Dean, does the macro lens get any zoomier? I'm not sure how you framed that shot.
--Bart
On 10/29/2015 9:04 PM, Dean Gibson AE7Q wrote:
These were taken with my Nikon DSLR with a macro lens. The circuit board is 1"x3". 2sec @ f/8. Better sharpness would have been at f/22, but this was adequate for my purposes at the time.
http://www.photoever.com/items/NookHdmiTop.jpg http://www.photoever.com/items/NookHdmiBottom.jpg
On 2015-10-29 20:42, Bart Kus wrote:
Hello,
I wanna take some pix of the 9HPn PCB layout. The components and markings are extremely small, and my camera can't resolve them. Does anyone have a microscope with picture capability to do a mosaic?
Thanks, Bart