Today, I was able to connect my RB911G-5HPacD (Node-2) to the Larch Mnt site. I setup the portable modem at the PUD Operation Center at 8600 NE 117th Avenue, Vancouver, Washington. Here are the connection details: channel: 5880/5/an wireless-protolcol: nv2 tx-rate: 1.62Mbps-5MHz/15 ssid: HamWAN radio-name:S3.Larch/K7WAN signal-strength: -85dBm noise-floor: -10dBm current-distance: 21 last-ip: 44.24.244.1 I was able to connect, verify Internet using HamWAN, verify DNS, and verify NTP synchronization. It started to rain heavy, so the fun was ended early than expected. However, the RBLHGG-5acD (Node-1) would not locate any sector modems. I verified it was the International version and updated to lastest software and firmware. But did notice the WiFi Interfaces reported multiple unsupported channels and the following: -- in scan-list does not contain valid channels -- empty scanlist Does anyone know what is causing this problem? If so, what is the fix. --- New Outlook Express and Windows Live Mail replacement - get it here: https://www.oeclassic.com/ Thanks Scott, N7DOD