Sorry to pester, So I am now on step 22 and I get the error listed, however, I am not sure what to do to overcome the error as described in the notes under the step. Here are the results from running the commands as listed: [admin@KC7Z-East_Bremerton-Gold_Mt] /ip dhcp-client> /interface bridge port print Flags: X - disabled, I - inactive, D - dynamic, H - hw-offload # INTERFACE BRIDGE HW PVID PRIORITY PATH-COST INTERNAL-PATH-COST HORIZON 0 ;;; defconf ether1 bridge yes 1 0x80 10 10 none 1 I ;;; defconf wlan1 bridge 1 0x80 10 10 none [admin@KC7Z-East_Bremerton-Gold_Mt] /ip dhcp-client> Jamie Hughes WA7JH Phone: (360) 362-4575 -----Original Message----- From: Steve - WA7PTM <psdr-list@aberle.net> Sent: Saturday, February 27, 2021 16:54 To: Jamie Hughes - WA7JH <wa7jh@outlook.com> Subject: Re: [HamWAN PSDR] Support needed See the notes below the command. I've seen that before, but don't recall how I solved it. Sorry. Steve Jamie Hughes wrote on 2/27/21 4:49 PM:
Well,
Step 22 presents this error: failure: can not run on slave interface
Jamie Hughes WA7JH Phone: (360) 362-4575