Thanks very much Nigel, I will do - John, kx7jm ---- On Sat, 17 Aug 2019 15:22:40 -0700 Nigel Vander Houwen <nigel@nigelvh.com> wrote ---- John, Since you’re connected to HamWAN, we can assign you space out of our large block. Please reach out to mailto:netops@hamwan.org with the details and one of the admins can help you out. Nigel On Aug 17, 2019, at 14:30, John C. Miller <mailto:kx7jm@jmit.com> wrote: _______________________________________________ PSDR mailing list mailto:PSDR@hamwan.org http://mail.hamwan.net/mailman/listinfo/psdr _______________________________________________ PSDR mailing list PSDR@hamwan.org http://mail.hamwan.net/mailman/listinfo/psdr Our club station has a HamWAN client connection, and we have several servers and devices to which I would like to assign 44-net addresses. These addresses would need to be routable from the internet and 44-net. Any networked devices that don't need to be reachable through the internet or 44-net would of course have private nat'ed addresses. As has been ably expressed on this list, HamWAN supports far more than just web traffic. :) A /29 block with 6 usable addresses would probably be too small. A /28 subnet with 14 usable IP addresses would be a good fit. Anything bigger would be a waste of 44-net ip space. From reading the HamWAN docs and the http://wiki.ampr.org web site, any net blocks smaller than /24 should be obtained from a regional coordinator that has one or more multi-user /24 blocks set aside for allocating smaller ip blocks. Assuming a /28 ip block on 44-net is allocated: I expect I would need to configure OSPF on the HamWAN modem to advertise routes to the /28 ip block over the wlan1 interface. Presumably an OSPF password would be needed. And of course static IPs from the /28 block would need to be assigned to the servers in question. First: Am I on the right track? Second: Is HamWAN such a "regional coordinator" (as mentioned on http://wiki.ampr.org/) that can allocate a /28 block for this purpose? Thanks very much - John kx7jm