But at what cost! :)
This looks about right:
http://www.dxengineering.com/parts/dxe-ssvc-2p
And I did find these earlier too:
https://www.tessco.com/products/displayProductInfo.do?sku=30050&eventGroup=4&eventPage=1
The problem is I need to buy 9 of these to offset-mount the sector antennas, and that's adding up.
--Bart
On 2/27/2013 11:30 PM, Kenny Richards wrote:
I know this isn't exactly what you wanted, but they do sell exactly what your looking for....
On Wed, Feb 27, 2013 at 11:09 PM, Bart Kus <me@bartk.us> wrote:
A decent suggestion! However, the review on the only Radio Shack one I can find is not flattering:
http://www.radioshack.com/product/index.jsp?productId=2062025#showFullReviews
And I can't find any such clamp @ frys.com. Can you?
--Bart
On 2/27/2013 10:45 PM, Allen wrote:
A better version can be found in the TV section at Radio Shack or Fryes.Allen----- Original Message -----From: Bart KusSent: Wednesday, February 27, 2013 7:25 PMSubject: [HamWAN PSDR] Where does one buy these V-Bolt clamps cheaply?I'm thinking about $2.50/ea would be nice. Muffler clamps are NOT adequate. Muffler clamps have 2 semi-circle contact surfaces, and if the pipe is slightly smaller than the clamp, this creates a 2-point contact which causes rocking action. Gross. The nice toothed and V-angled designs here are the bomb.
Soup for scale. :)
--Bart
_______________________________________________
PSDR mailing list
PSDR@hamwan.org
http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org
_______________________________________________ PSDR mailing list PSDR@hamwan.org http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org
_______________________________________________
PSDR mailing list
PSDR@hamwan.org
http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org
_______________________________________________ PSDR mailing list PSDR@hamwan.org http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org
_______________________________________________
PSDR mailing list
PSDR@hamwan.org
http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org