Is anyone maintaining the https://www.hamwan.org/Standards/Network%20Engineering/Client%20Node%20Confi... web page? The reasons I ask are: • Step 1 will not work as listed as the command is wrong (should be "/system package update install" in RouterOS v6.43.12) and if some preliminary steps are not taken (moving the default network to one connected to the Internet with a "/ip address add address=a.b.c.d/xx interface=ether1" command and establishing a default gateway with a "/ip route add gateway a.b.c.gw" command), then the update will fail. • Step 21 on a Dynadish5 results in a "failure: incompatible band and channel-width" message unless "channel-width=5mhz" is added to the command. • Step 22 on a Dynadish5 results in a "failure: can not run on slave interface" message. This last one has me stumped, and I have been unable to determine a workaround. Has anyone else encountered and solved this problem? Thanks, Steve