Wow, that -35dBm signal is incredibly strong.  The radios are good with 1/1000th that power.  :)  Congrats!  What's your location?  Perhaps we can run some projections/obstacle spotting for you...

--Bart


On 2/26/2014 5:41 PM, Ryan Elliott Turner wrote:
Good luck! Very exciting!


On Wed, Feb 26, 2014 at 7:39 PM, Erik Robins <erik.robins@gmail.com> wrote:
Last month I tried to connect from my rooftop and got no signal at all.

Today, I took my setup up to 76th Street, visually aimed it at the tower and connected.

[admin@K7QOG-Paine] > /interface wireless monitor 0
                  status: connected-to-ess
                    band: 5ghz-n-5mhz
               frequency: 5905MHz
       wireless-protocol: nv2
                 tx-rate: 1.5Mbps
                 rx-rate: 1.5Mbps
                    ssid: HamWAN
                   bssid: D4:CA:6D:7A:B8:07
              radio-name: Paine-S2
         signal-strength: -35dBm
     signal-strength-ch0: -35dBm
      tx-signal-strength: -35dBm
  tx-signal-strength-ch0: -35dBm
             noise-floor: -121dBm
         signal-to-noise: 86dB
                  tx-ccq: 10%
                  rx-ccq: 10%
   authenticated-clients: 1
        current-distance: 3
                wds-link: no
                  bridge: no
        routeros-version: 6.7
                 last-ip: 44.24.240.161

So, the next thing I will try is to climb a tree and see if I can get a signal. Wish me luck!

Erik, K7QOG

_______________________________________________
PSDR mailing list
PSDR@hamwan.org
http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org




--

Ryan Turner



_______________________________________________
PSDR mailing list
PSDR@hamwan.org
http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org