Tom,When I use a mesh dish and the Metal S5HPn, I get signal in only one plane at my test site at the corner of E Collins and Baby Doll Roads. Perhaps something is up (or down, in this case!).I'll do some additional testing with the dish later this week/weekend.73 from Dan at K7MM From: Tom Hayward <tom@tomh.us> To: Daniel Ransom <danra995@yahoo.com> Cc: Puget Sound Data Ring <psdr@hamwan.org> Sent: Wednesday, January 27, 2016 2:34 PM Subject: Re: [HamWAN PSDR] Kitsap County Gold Mountain HamWAN Attempts, Dish and Sector Antennas K7MM On Wed, Jan 27, 2016 at 2:22 PM, Daniel Ransom <danra995@yahoo.com> wrote:
Tom, Thanks for the tip! The MIMO function is on:
Very odd! Based on the received signal strength, it would appear only one chain is running.
Next I tried to run on only the '0' and only the '1' antennas with the "interface wireless set 0 tx-chains=n and rx-chains=n" commands. The result: no signal. Is there another way to use only one antenna polarization for testing?
This is the only way I know to choose a single chain. Tom KD7LXL