Kyle, On a related subject, can we get your node's GPS location so we can add it to the map and real-time signal reporting? --Bart On 2/22/2015 12:59 PM, Tom Hayward wrote:
On Sun, Feb 22, 2015 at 12:04 PM, Kyle Burgess <kd7iyt@gmail.com> wrote:
Sorry about that. I accidentally applied the wrong settings to the Metal when configuring it yesterday. It caused me to lose connection to the Metal and obviously created more of a problem than I was aware of. After doing a factory reset and re-following the client install directions, I then got it to connect properly. This wasn't your fault. The sector should never have been configured to request DHCP from you.
FYI.. Some of the client install directions could use some tweaking as they may be misleading for some. The NTP synchronization step should probably be pushed farther to the end of the directions (after connecting to the network). Also, when configuring the local DHCP server, step 2 needs to define the network address, not the local ethernet address (i.e. 192.168.88.0/24, not 192.168.88.1/24 like it shows). Fixed.
If you check the history on that wiki page, you'll see quite a few edits in the last few days. I clarified some things and introduced some new issues (like the DHCP server network).
Tom
_______________________________________________ PSDR mailing list PSDR@hamwan.org http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org