If the need for larger and more sophisticated grounding architectures were required. I 'd be inclined to just install 1/2" armored flex conduits at about 1.40/ft and blow multiple runs of TC into it. You'd still come in at under 2.00/foot and reduce the amount of cushions needed.Sent on the go, from somewhere other than here. -------- Original message --------From: Bryan Fields <Bryan@bryanfields.net> Date: 2019-09-02 13:00 (GMT-08:00) To: psdr@hamwan.org Subject: Re: [HamWAN PSDR] 1/2" Outdoor UV Protected CAT 5e On 9/1/19 11:18 PM, Jamie Hughes wrote:> Please see attached data sheet. And I got an email with pricing:> Custom cuts are $10/ft but I can do a full 1000ft spool for $7500I believe this was a nice way of telling you to "fuck off". :D7.50/ft is insane, and it's not even got a water block in it. I've used abelden product which was gel filled and armored/shielded for under a dollarper foot.Even 1 5/8" coax is 7/foot new, and it's got 4 oz of copper per foot in it.73's-- Bryan Fields727-409-1194 - Voicehttp://bryanfields.net_______________________________________________PSDR mailing listPSDR@hamwan.orghttp://mail.hamwan.net/mailman/listinfo/psdr