27 Jan
2016
27 Jan
'16
2:34 p.m.
On Wed, Jan 27, 2016 at 2:22 PM, Daniel Ransom <danra995@yahoo.com> wrote:
Tom, Thanks for the tip! The MIMO function is on:
Very odd! Based on the received signal strength, it would appear only one chain is running.
Next I tried to run on only the '0' and only the '1' antennas with the "interface wireless set 0 tx-chains=n and rx-chains=n" commands. The result: no signal. Is there another way to use only one antenna polarization for testing?
This is the only way I know to choose a single chain. Tom KD7LXL