I'm using web based speed test to judge my signal, they are a lot different than what I'm seeing via the terminal. My questions; 1. Is </interface wireless monitor 0> the best command to use when tweaking the dish alignment? 2. With a noise floor of around -121 would I see big benefits from purchasing the Sleeve30? 3. My ccq's sure vary throughout the day irregardless on a stable noise floor. Why I hope you all have a wonderful Thanksgiving, I'm grateful for all those of you who have helped me here. -Ric [ric@K7ITE-Lookout] > /interface wireless monitor 0 status: connected-to-ess channel: 5900/10/an wireless-protocol: nv2 tx-rate: 57.7Mbps-10MHz/2S/SGI rx-rate: 43.3Mbps-10MHz/2S/SGI ssid: HamWAN bssid: 74:4D:28:57:F6:BA radio-name: Lookout-S2/WA7DEM signal-strength: -65dBm signal-strength-ch0: -67dBm signal-strength-ch1: -69dBm tx-signal-strength: -65dBm tx-signal-strength-ch0: -71dBm tx-signal-strength-ch1: -67dBm noise-floor: -121dBm signal-to-noise: 56dB tx-ccq: 90% rx-ccq: 80% authenticated-clients: 1 current-distance: 31 wds-link: no bridge: no routeros-version: 6.45.2 last-ip: 172.217.3.174 current-tx-powers: 6Mbps:27(27/30),9Mbps:27(27/30),12Mbps:27(27/30),18Mbps:27(27/30),24Mbps:27(27/30),36Mbps:27(27/30),48Mbps:25(25/28),54Mbps:24(24/27),HT20-0:27(27/30),HT20-1:27(27/30), HT20-2:27(27/30),HT20-3:27(27/30),HT20-4:27(27/30),HT20-5:26(26/29),HT20-6:25(25/28),HT20-7:23(23/26) notify-external-fdb: no