On 3/9/15 12:55 PM, Marc Lacy wrote:

Bryan,

Are these mods posted somewhere?

Thanks 73 marc kd7ryy

Not that I know of, but I have some notes on them from 15 years ago when I was working with them. I'd be happy to share. It's basically flashing the spectrum firmware on them (it's universal for AU/SU), changing the solder jumpers and then rebooting, then flashing the AU firmware on them. Flashing it is nothing special, tftp the files to them. I also have the firmware if anyone wants it. They are not fast by today's standards (1.6mbit throughput) but will do pbit QoS, Vlans, single freq, and have a nice management interface. I have a decoder key card to get into the test menu too/ password reset. The latest firmware is up here, 4.5.16 is the one you want for ham stuff. http://www.wirelessconnections.net/index.php/BreezeACCESS-900/View-category.... A couple common problems were Boori init errors which are unrecoverable due to the ASIC being dead, and the Ethernet chip. The chip is easy to repair, just swap it and you're good to go. -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net