Hello, I just realized that this list is for the W WA area, so I thought I would start here with this: Back in July, I ordered a MikroTik mANT30 dish antenna (with precise alignment mount) for my HamWAN installation. It arrived with the edge of the dish bent up AND the mount bent (!). I contacted the vendor and they sent another one and said they would send me a UPS label for the return. After 3 weeks, I emailed my contact and told them that if I didn't get the shipping labels, I would give it away. Well, it has been month with not a peep from them, so: I am offering up the antenna for free to someone who could use it. I bent the mounting frame tabs to fit the dish and cleaned up the edges of the dish as best I could with an adjustable wrench as a bending lever. The dish itself has maintained it's symmetry and I was able to bend the mounting tabs to match it, so it should be fully functional. Just to make sure, I assembled it and it looks fine, except for a bit of unevenness at the very edge of the dish. It is ready to mount a MikroTik radio (I juse the MikroTik RB912UAG-5HPnd). Here is a link to the dish's spec sheet: https://i.mt.lv/cdn/rb_files/mANT30-140526124123.pdf (it is the one on the bottom) I would prefer to pass this on to someone involved in Emcom activities who will actually use it - or someone helping someone else getting set up. Give me a call to arrange pickup, I will not ship it. I am located in NE Seattle in the Maple Leaf neighborhood, you can find my address in QRZ. 73, John, K7HV 206 947 0545