Hi, Anybody know how to configure a PowerConnect 5324 to not prompt for a username/password after SSH key auth? --Bart
sounds like it's not able to auth the key. maybe try ssh with a couple -VVV's to see if it really does like your DSA key. On Thu, May 21, 2015 at 3:31 PM, Bart Kus <me@bartk.us> wrote:
Hi,
Anybody know how to configure a PowerConnect 5324 to not prompt for a username/password after SSH key auth?
--Bart
_______________________________________________ PSDR mailing list PSDR@hamwan.org http://mail.hamwan.net/mailman/listinfo/psdr
http://en.community.dell.com/support-forums/network-switches/f/866/t/1777401... On Thu, May 21, 2015 at 6:04 PM, Don Fanning <don@00100100.net> wrote:
sounds like it's not able to auth the key. maybe try ssh with a couple -VVV's to see if it really does like your DSA key.
On Thu, May 21, 2015 at 3:31 PM, Bart Kus <me@bartk.us> wrote:
Hi,
Anybody know how to configure a PowerConnect 5324 to not prompt for a username/password after SSH key auth?
--Bart
_______________________________________________ PSDR mailing list PSDR@hamwan.org http://mail.hamwan.net/mailman/listinfo/psdr
The key auth is actually working: debug1: Offering DSA public key: /home/eo/.ssh/id_dsa debug1: Server accepts key: pkalg ssh-dss blen 433 debug1: Authentication succeeded (publickey). Authenticated to 44.24.240.140 ([44.24.240.140]:22). The problem is that after DSA auth completes, it still prompts for username + password! --Bart On 5/21/2015 6:04 PM, Don Fanning wrote:
http://en.community.dell.com/support-forums/network-switches/f/866/t/1777401...
On Thu, May 21, 2015 at 6:04 PM, Don Fanning <don@00100100.net <mailto:don@00100100.net>> wrote:
sounds like it's not able to auth the key. maybe try ssh with a couple -VVV's to see if it really does like your DSA key.
On Thu, May 21, 2015 at 3:31 PM, Bart Kus <me@bartk.us <mailto:me@bartk.us>> wrote:
Hi,
Anybody know how to configure a PowerConnect 5324 to not prompt for a username/password after SSH key auth?
--Bart
_______________________________________________ PSDR mailing list PSDR@hamwan.org <mailto:PSDR@hamwan.org> http://mail.hamwan.net/mailman/listinfo/psdr
_______________________________________________ PSDR mailing list PSDR@hamwan.org http://mail.hamwan.net/mailman/listinfo/psdr
hmm... maybe twiddling with the 'login authentication' on the 'line ssh' pty? On Thu, May 21, 2015 at 6:21 PM, Bart Kus <me@bartk.us> wrote:
The key auth is actually working:
debug1: Offering DSA public key: /home/eo/.ssh/id_dsa debug1: Server accepts key: pkalg ssh-dss blen 433 debug1: Authentication succeeded (publickey). Authenticated to 44.24.240.140 ([44.24.240.140]:22).
The problem is that after DSA auth completes, it still prompts for username + password!
--Bart
On 5/21/2015 6:04 PM, Don Fanning wrote:
http://en.community.dell.com/support-forums/network-switches/f/866/t/1777401...
On Thu, May 21, 2015 at 6:04 PM, Don Fanning <don@00100100.net> wrote:
sounds like it's not able to auth the key. maybe try ssh with a couple -VVV's to see if it really does like your DSA key.
On Thu, May 21, 2015 at 3:31 PM, Bart Kus <me@bartk.us> wrote:
Hi,
Anybody know how to configure a PowerConnect 5324 to not prompt for a username/password after SSH key auth?
--Bart
_______________________________________________ PSDR mailing list PSDR@hamwan.org http://mail.hamwan.net/mailman/listinfo/psdr
_______________________________________________ PSDR mailing listPSDR@hamwan.orghttp://mail.hamwan.net/mailman/listinfo/psdr
_______________________________________________ PSDR mailing list PSDR@hamwan.org http://mail.hamwan.net/mailman/listinfo/psdr
also making sure that aaa isn't interfering? On Thu, May 21, 2015 at 6:25 PM, Don Fanning <don@00100100.net> wrote:
hmm... maybe twiddling with the 'login authentication' on the 'line ssh' pty?
On Thu, May 21, 2015 at 6:21 PM, Bart Kus <me@bartk.us> wrote:
The key auth is actually working:
debug1: Offering DSA public key: /home/eo/.ssh/id_dsa debug1: Server accepts key: pkalg ssh-dss blen 433 debug1: Authentication succeeded (publickey). Authenticated to 44.24.240.140 ([44.24.240.140]:22).
The problem is that after DSA auth completes, it still prompts for username + password!
--Bart
On 5/21/2015 6:04 PM, Don Fanning wrote:
http://en.community.dell.com/support-forums/network-switches/f/866/t/1777401...
On Thu, May 21, 2015 at 6:04 PM, Don Fanning <don@00100100.net> wrote:
sounds like it's not able to auth the key. maybe try ssh with a couple -VVV's to see if it really does like your DSA key.
On Thu, May 21, 2015 at 3:31 PM, Bart Kus <me@bartk.us> wrote:
Hi,
Anybody know how to configure a PowerConnect 5324 to not prompt for a username/password after SSH key auth?
--Bart
_______________________________________________ PSDR mailing list PSDR@hamwan.org http://mail.hamwan.net/mailman/listinfo/psdr
_______________________________________________ PSDR mailing listPSDR@hamwan.orghttp://mail.hamwan.net/mailman/listinfo/psdr
_______________________________________________ PSDR mailing list PSDR@hamwan.org http://mail.hamwan.net/mailman/listinfo/psdr
Hey, right on! I defined two new authentication methods: SnoDEM-SW1(config)# aaa authentication login poop none SnoDEM-SW1(config)# aaa authentication enable poop none And then assigned them to the SSH line. Now I can login with just my SSH key. Sweet! Hopefully there are no side-effects. :) --Bart On 5/21/2015 6:25 PM, Don Fanning wrote:
also making sure that aaa isn't interfering?
On Thu, May 21, 2015 at 6:25 PM, Don Fanning <don@00100100.net <mailto:don@00100100.net>> wrote:
hmm... maybe twiddling with the 'login authentication' on the 'line ssh' pty?
On Thu, May 21, 2015 at 6:21 PM, Bart Kus <me@bartk.us <mailto:me@bartk.us>> wrote:
The key auth is actually working:
debug1: Offering DSA public key: /home/eo/.ssh/id_dsa debug1: Server accepts key: pkalg ssh-dss blen 433 debug1: Authentication succeeded (publickey). Authenticated to 44.24.240.140 ([44.24.240.140]:22).
The problem is that after DSA auth completes, it still prompts for username + password!
--Bart
On 5/21/2015 6:04 PM, Don Fanning wrote:
http://en.community.dell.com/support-forums/network-switches/f/866/t/1777401...
On Thu, May 21, 2015 at 6:04 PM, Don Fanning <don@00100100.net <mailto:don@00100100.net>> wrote:
sounds like it's not able to auth the key. maybe try ssh with a couple -VVV's to see if it really does like your DSA key.
On Thu, May 21, 2015 at 3:31 PM, Bart Kus <me@bartk.us <mailto:me@bartk.us>> wrote:
Hi,
Anybody know how to configure a PowerConnect 5324 to not prompt for a username/password after SSH key auth?
--Bart
_______________________________________________ PSDR mailing list PSDR@hamwan.org <mailto:PSDR@hamwan.org> http://mail.hamwan.net/mailman/listinfo/psdr
_______________________________________________ PSDR mailing list PSDR@hamwan.org <mailto:PSDR@hamwan.org> http://mail.hamwan.net/mailman/listinfo/psdr
_______________________________________________ PSDR mailing list PSDR@hamwan.org <mailto:PSDR@hamwan.org> http://mail.hamwan.net/mailman/listinfo/psdr
_______________________________________________ PSDR mailing list PSDR@hamwan.org http://mail.hamwan.net/mailman/listinfo/psdr
you probably could keep aaa logging working for audit controls. Only reason to do aaa auth is for centralized access control. On Thu, May 21, 2015 at 6:57 PM, Bart Kus <me@bartk.us> wrote:
Hey, right on! I defined two new authentication methods:
SnoDEM-SW1(config)# aaa authentication login poop none SnoDEM-SW1(config)# aaa authentication enable poop none
And then assigned them to the SSH line. Now I can login with just my SSH key. Sweet!
Hopefully there are no side-effects. :)
--Bart
On 5/21/2015 6:25 PM, Don Fanning wrote:
also making sure that aaa isn't interfering?
On Thu, May 21, 2015 at 6:25 PM, Don Fanning <don@00100100.net> wrote:
hmm... maybe twiddling with the 'login authentication' on the 'line ssh' pty?
On Thu, May 21, 2015 at 6:21 PM, Bart Kus <me@bartk.us> wrote:
The key auth is actually working:
debug1: Offering DSA public key: /home/eo/.ssh/id_dsa debug1: Server accepts key: pkalg ssh-dss blen 433 debug1: Authentication succeeded (publickey). Authenticated to 44.24.240.140 ([44.24.240.140]:22).
The problem is that after DSA auth completes, it still prompts for username + password!
--Bart
On 5/21/2015 6:04 PM, Don Fanning wrote:
http://en.community.dell.com/support-forums/network-switches/f/866/t/1777401...
On Thu, May 21, 2015 at 6:04 PM, Don Fanning <don@00100100.net> wrote:
sounds like it's not able to auth the key. maybe try ssh with a couple -VVV's to see if it really does like your DSA key.
On Thu, May 21, 2015 at 3:31 PM, Bart Kus <me@bartk.us> wrote:
Hi,
Anybody know how to configure a PowerConnect 5324 to not prompt for a username/password after SSH key auth?
--Bart
_______________________________________________ PSDR mailing list PSDR@hamwan.org http://mail.hamwan.net/mailman/listinfo/psdr
_______________________________________________ PSDR mailing listPSDR@hamwan.orghttp://mail.hamwan.net/mailman/listinfo/psdr
_______________________________________________ PSDR mailing list PSDR@hamwan.org http://mail.hamwan.net/mailman/listinfo/psdr
_______________________________________________ PSDR mailing listPSDR@hamwan.orghttp://mail.hamwan.net/mailman/listinfo/psdr
_______________________________________________ PSDR mailing list PSDR@hamwan.org http://mail.hamwan.net/mailman/listinfo/psdr
participants (2)
-
Bart Kus -
Don Fanning