Bart, I've seen several of these e-mails about the project, but don't remember seeing an explanation of a key aspect. What is the plan to connect the buildings with gigabit Ethernet? Are you planning on digging a trench, stringing the CAT5 along the tree's or something else? Sorry, I am not familiar with the layout or location of these different buildings. so maybe that is a good place to start with your plan? Have you received permission from the site owners for this work? Thanks Kenny On Sun, May 31, 2020 at 11:08 PM Jason J. Hill <Jason@pnwrr.com> wrote:
I like this idea. It looks like the wiztronics site would be the one you'd like to put the link to rattlesnake on. Since we don't currently occupy their main tower structure, we can check with them to see if a dish could be covered under our current lease at no additional cost if you'd like.
Jason kd7tqn
------ Original message------ *From: *Bart Kus *Date: *Sun, May 31, 2020 10:48 PM *To: *Puget Sound Data Ring; *Cc: * *Subject:*[HamWAN PSDR] VOTE: Baldi LAN expansion and Rattlesnake link
Hello,
We have 4 clients connected to Baldi-S1 (a SISO sector) that are kind of silly:
# INTERFACE RADIO-NAME MAC-ADDRESS AP SIGNAL... TX-RATE UPTIME 0 wlan1 AF7PR-Baldi E4:8D:8C:C6:F5:45 no -60dBm 32.5... 2d8h51m46s 1 wlan1 KD7TQN-Baldi D4:CA:6D:C2:ED:93 no -65dBm 32.5... 2d8h51m32s 2 wlan1 N7OEP/Baldi-B... D4:CA:6D:0D:53:F9 no -60dBm 32.5... 2d8h51m27s 3 wlan1 Rattlesnake-B... 64:D1:54:AF:3F:CD no -79dBm 19.5... 1d9h35m21s
They're silly because the first 3 are at the same mountain top, just a couple hundred feet away in adjacent shacks. This is a waste of prime long-range spectrum, being used to do local-links. I'd like to get all the shacks @ Baldi tied together via gigabit Ethernet, and install access switches at the 2 other shacks so people there can plug into the LAN directly. This high speed LAN between all shacks can then be used to allow us to address the 4th silly client, which is Rattlesnake Mountain. I'd like to install a dedicated dish on the northernmost tower (fed by the new high speed LAN) to act as a dedicated high speed link between Baldi and Rattlesnake. The dish on the Rattlesnake side will also need a modem upgrade to run at full speed, and I'm including that in this proposal.
Here is the rough budget for this spend request:
*Item* *Quantity* *Cost* *Subtotal* 500ft pull rope 1 $12.97 $12.97 425ft duct rod 1 $111 $111 Taxes for above 2 items 1 $11.53 $11.53 CRS112-8P-4S-IN for northernmost building, feeding Rattlesnake dish w/ PoE and access ports for clients 1 $170 $170 CRS326-24G-2S+RM for middle building, acting as mid-span switch and providing ports to lots of devices there 1 $185.24 $185.24 Taxes for above 2 items 1 $33.04 $33.04 1000ft Shielded CAT5 TC-PRO ToughCable 1 $137.68 $137.68 Taxes for above 1 $12.80 $12.80 Existing Inventory Estimate: RB921UAGS-5SHPacD-NM modem 2 $150 $300 Existing Inventory Estimate: mANT30 2ft microwave dish 1 $120 $120 Existing Inventory Estimate: Sleeve30 2ft microwave dish isolation kit 1 $100 $100 TOTAL COST ESTIMATE
$1,194.26
Current HamWAN balance is about $16k.
Procedural reminder since we haven't had one of these emails in way too long: HamWAN directors have 24 hours to vote upon such spend decisions, and members have the same time to weigh in with opinions to influence director votes. Our procedures are documented here:
http://hamwan.org/Administrative/Constitution.html
--Bart
_______________________________________________ PSDR mailing list PSDR@hamwan.org http://mail.hamwan.net/mailman/listinfo/psdr