Hello -- I'm trying to set up a connection, using the instructions here: http://hamwan.org/Standards/Network%20Engineering/Client%20Node%20Configurat... I'm getting all the way to the point where I try to do a tracert ("Connect" step 3), but nothing is coming through. My monitor shows the following -- any ideas what I should do next? Am I just not hitting the Gold Mountain node well enough? [admin@K7XST-Gold] > /interface wireless monitor 0 status: connected-to-ess channel: 5900/5/an wireless-protocol: nv2 tx-rate: 14.4Mbps-5MHz/2S/SGI rx-rate: 1.6Mbps-5MHz/1S ssid: HamWAN bssid: E4:8D:8C:F1:6D:22 radio-name: Gold-S2/K7WAN signal-strength: -76dBm signal-strength-ch0: -78dBm signal-strength-ch1: -80dBm tx-signal-strength: -71dBm tx-signal-strength-ch0: -73dBm tx-signal-strength-ch1: -75dBm noise-floor: -107dBm signal-to-noise: 31dB tx-ccq: 54% rx-ccq: 6% authenticated-clients: 1 current-distance: 33 wds-link: no bridge: no routeros-version: 6.36 last-ip: 44.24.240.97 notify-external-fdb: no