Sorry to pester, So I am now on step 22 and I get the error listed, however, I am not sure what to do to overcome the error as described in the notes under the step. Here are the results from running the commands as listed: [admin@KC7Z-East_Bremerton-Gold_Mt] /ip dhcp-client> /interface bridge port print Flags: X - disabled, I - inactive, D - dynamic, H - hw-offload # INTERFACE BRIDGE HW PVID PRIORITY PATH-COST INTERNAL-PATH-COST HORIZON 0 ;;; defconf ether1 bridge yes 1 0x80 10 10 none 1 I ;;; defconf wlan1 bridge 1 0x80 10 10 none [admin@KC7Z-East_Bremerton-Gold_Mt] /ip dhcp-client> Jamie Hughes WA7JH Phone: (360) 362-4575 -----Original Message----- From: Steve - WA7PTM <psdr-list@aberle.net> Sent: Saturday, February 27, 2021 16:54 To: Jamie Hughes - WA7JH <wa7jh@outlook.com> Subject: Re: [HamWAN PSDR] Support needed See the notes below the command. I've seen that before, but don't recall how I solved it. Sorry. Steve Jamie Hughes wrote on 2/27/21 4:49 PM:
Well,
Step 22 presents this error: failure: can not run on slave interface
Jamie Hughes WA7JH Phone: (360) 362-4575
Hi Jamie, Wlan1 needs to be removed from the bridge. Do /interface bridge port print Then remove the port listed for wlan1 Based on your previous output, it would be: /interface bridge port print remove 1 Then retry step 22 /ip dhcp-client add add-default-route=yes dhcp-options=hostname,clientid disabled=no interface=wlan1 KI7SBI Dylan Ambauen 360-850-1200 On Sat, Feb 27, 2021, 17:11 Jamie Hughes <wa7jh@outlook.com> wrote:
Sorry to pester,
So I am now on step 22 and I get the error listed, however, I am not sure what to do to overcome the error as described in the notes under the step.
Here are the results from running the commands as listed:
[admin@KC7Z-East_Bremerton-Gold_Mt] /ip dhcp-client> /interface bridge port print Flags: X - disabled, I - inactive, D - dynamic, H - hw-offload # INTERFACE BRIDGE HW PVID PRIORITY PATH-COST INTERNAL-PATH-COST HORIZON 0 ;;; defconf ether1 bridge yes 1 0x80 10 10 none 1 I ;;; defconf wlan1 bridge 1 0x80 10 10 none [admin@KC7Z-East_Bremerton-Gold_Mt] /ip dhcp-client>
Jamie Hughes WA7JH Phone: (360) 362-4575
-----Original Message----- From: Steve - WA7PTM <psdr-list@aberle.net> Sent: Saturday, February 27, 2021 16:54 To: Jamie Hughes - WA7JH <wa7jh@outlook.com> Subject: Re: [HamWAN PSDR] Support needed
See the notes below the command.
I've seen that before, but don't recall how I solved it. Sorry.
Steve
Jamie Hughes wrote on 2/27/21 4:49 PM:
Well,
Step 22 presents this error: failure: can not run on slave interface
Jamie Hughes WA7JH Phone: (360) 362-4575
PSDR mailing list PSDR@hamwan.org http://mail.hamwan.net/mailman/listinfo/psdr
Dylan, Thank you. I managed to get this completed using win box. Hopefully I'll get some time tomorrow to test with Gold Sent from my T-Mobile 5G Device Get Outlook for Android<https://aka.ms/ghei36> ________________________________ From: PSDR <psdr-bounces@hamwan.org> on behalf of Dylan Ambauen <dylan@ambauen.com> Sent: Saturday, February 27, 2021 10:22:18 PM To: Puget Sound Data Ring <psdr@hamwan.org> Subject: Re: [HamWAN PSDR] Support needed Hi Jamie, Wlan1 needs to be removed from the bridge. Do /interface bridge port print Then remove the port listed for wlan1 Based on your previous output, it would be: /interface bridge port print remove 1 Then retry step 22 /ip dhcp-client add add-default-route=yes dhcp-options=hostname,clientid disabled=no interface=wlan1 KI7SBI Dylan Ambauen 360-850-1200 On Sat, Feb 27, 2021, 17:11 Jamie Hughes <wa7jh@outlook.com<mailto:wa7jh@outlook.com>> wrote: Sorry to pester, So I am now on step 22 and I get the error listed, however, I am not sure what to do to overcome the error as described in the notes under the step. Here are the results from running the commands as listed: [admin@KC7Z-East_Bremerton-Gold_Mt] /ip dhcp-client> /interface bridge port print Flags: X - disabled, I - inactive, D - dynamic, H - hw-offload # INTERFACE BRIDGE HW PVID PRIORITY PATH-COST INTERNAL-PATH-COST HORIZON 0 ;;; defconf ether1 bridge yes 1 0x80 10 10 none 1 I ;;; defconf wlan1 bridge 1 0x80 10 10 none [admin@KC7Z-East_Bremerton-Gold_Mt] /ip dhcp-client> Jamie Hughes WA7JH Phone: (360) 362-4575 -----Original Message----- From: Steve - WA7PTM <psdr-list@aberle.net<mailto:psdr-list@aberle.net>> Sent: Saturday, February 27, 2021 16:54 To: Jamie Hughes - WA7JH <wa7jh@outlook.com<mailto:wa7jh@outlook.com>> Subject: Re: [HamWAN PSDR] Support needed See the notes below the command. I've seen that before, but don't recall how I solved it. Sorry. Steve Jamie Hughes wrote on 2/27/21 4:49 PM:
Well,
Step 22 presents this error: failure: can not run on slave interface
Jamie Hughes WA7JH Phone: (360) 362-4575
PSDR mailing list PSDR@hamwan.org<mailto:PSDR@hamwan.org> http://mail.hamwan.net/mailman/listinfo/psdr<https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmail.hamwan.net%2Fmailman%2Flistinfo%2Fpsdr&data=04%7C01%7C%7C8fa005bff9be410d6e5108d8dbb14338%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637500901678770011%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=PQz796wVvGmsjcoJO1GaR5LJYClLgddnabbci2gxmF8%3D&reserved=0>
participants (2)
-
Dylan Ambauen -
Jamie Hughes